Yutai ultrasonic testing has strong practicability, high performance and high cost performance!
2020-05-16 信息来源： 佛山市誉泰机械自动化科技有限公司
Ultrasonic testing
Application：
Used for testing the filtration efficiency of particulate matter such as masks, melt-spraying cloth and filter materials.
meet a criterion：
GB/T19083-2010
YY 0469-2011
GB/T32610-2016
Specification
Flow range
(20-100) L/mim, accuracy: 2% (customizable 10-100)
Filtration efficiency
(0.001-99.999) %
Resistance
0-2000pa, accuracy: 2%
Test area
100cm²
Aerosol
sodium chloride (optional DOP, DEHS, paraffin oil, corn oil)
Aerosol concentration
no more than 30mg/m3(salt), no more than 200mg/m3 (oil)
Test mode
initial efficiency and load efficiency
Test temperature
(25±5) ℃
Relative humidity
(30±10) %
Overall size
950*600*600mm
Weight
100 kg
Power supply
AC220V 50HZ
Air source
flow rate at 550KPa: 198L/min(0.6mpa)
Standard configuration list:
One mainframe
Comes with a thermal printer
Mask test fixture set
Applicable standards : (for different standards, different accessories are required)
GB/T 32610-2016 Technical specification for daily protective masks 6.13 (appendix A)
GB 2626-2006 Respiratory protective equipment-self-absorption filter respirator against particulate matter
GB 19082-2009 Technical requirements for disposable protective clothing
GB 19083-2010 Technical requirements for protective masks
